|
|
|
|
|
 |
|
PAQUETES > YCZ16 |
| |
|
| |
 |
|
All units shall be
factory assembled, piped, internally wired and fully charged
with R-22. All units shall be designed to operate at outdoor
ambient temperatures as high as 115°F. Cooling capacities shall
be rated in accordance with A.R.I. standards. The YCZ-F heating/cooling
unit design is UL listed, specifically for outdoor applications
using propane or natural gas. All units shall be designed for
outdoor rooftop or ground level installation. Exterior surfaces
of all units shall be phosphatized, zinc-coated steel with epoxy
resin primer and baked enamel finish. Shipped for horizontal
application, convertible to downflow. |
|
|
|
|
| |
Casings
All panels shall be 20-gauge steel, gasketed and insulated. Foil-faced
glass fiber insulation shall be in the heat exchanger section.
Matfaced insulation shall be in the evaporator section. Base pan
and mounting rails shall be 18 gauge. WEATHERGUARD™ exterior
corrosion resistant screws shall be used for added resistance to
rust and corrosion.
Coil Guards
The COIL-SAV'R™ end and side grilles shall be Lexan®, louvertype.
The grilles shall protect the coil from hail, sticks, and
handling damage.
Controls
Refrigeration cycle controls shall include condenser fan,
evaporator fan and compressor contactors. Compressors shall be
equipped with a combination internal winding thermostat/current
overload. Internal high pressure relief shall also be provided.
Comfort-R™ System shall provide better humidity control in the
cooling mode.
Refrigeration System
Compressors — All units shall have hermetically sealed Climatuff®
compressors. Compressors shall be equipped with over temperature,
over current and high pressure protection. Crankcase heaters
shall be standard on all three phase models. |
|
|
| |
FICHA TÉCNICA
|
|
|
 |
|
| PAQUETES |
|
|
|
|
|
