|
|
|
|
|
 |
|
PAQUETES > YCC3 |
| |
|
| |
 |
|
All units shall be
factory assembled, piped, internally wired and fully charged
with refrigerant. All units shall be designed to operate at
outdoor ambient temperatures as high as 115°F Cooling capacities
shall be rated in accordance with A.R.I. standards. The YC
heating/cooling unit design is UL listed, specifically for
outdoor applications using natural gas or propane.
All units shall be designed for outdoor rooftop or ground level
installation. Unit casing is constructed of heavy gauge,
galvanized steel and painted with a weather-resistant powder
paint.
Shipped for horizontal application, convertible to downflow.
|
|
|
|
|
| |
Casings
All panels shall be heavy gauge steel, gasketed and insulated.
Foil-faced fiber insulation shall be in the heat exchanger
section. Foil-faced insulation shall be in the evaporator
section. Base pan shall be heavy gauge steel. WEATHERGUARD™
exterior corrosion resistant screws shall be used for
added resistance to rust and corrosion.
Controls
Refrigeration cycle controls shall include condenser fan,
evaporator fan and compressor contactors. Compressors shall
be equipped with a combination internal winding
thermostat/current overload.
Internal high pressure relief shall also be provided.
Refrigeration System
Compressors — The Climatuff® compressor features internal over
temperature and pressure protector, total dipped hermetic motor.
Other features include: roto lock suction and discharge
refrigeration connections, centrifugal oil pump, and low
vibration and noise. |
|
|
| |
FICHA TÉCNICA
|
|
|
 |
|
| PAQUETES |
|
|
|
|
|
